Part Number Hot Search : 
PRODUC SMB120 DTC12 LM320 MS1244 2SD1530 VC00P JC501Q
Product Description
Full Text Search
 

To Download 0RCM-20S Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 ISOLATED DC/DC CONVERTERS
48 VDC Input 12 VDC/20 A Output, 1/4 Brick
0RCM-20S/30S Series
* * * * * *
RoHS Compliant
PRELIMINARY
Industry standard quarter-brick package Up to 240 W at 96% efficiency 1500 V isolation Remote on/off Low cost Safety Agency Approvals
Description
The 0RCM-20S/30S "Cimarron" Series are isolated DC/DC converters that operate from a nominal 48 VDC source. These converters use a full bridge power train to provide isolation and step down. These units will provide up to 240 W of output power from a nominal 48 VDC input. These units are designed to be highly efficient and low cost. Features include remote on/off, over current protection and under voltage lockout. These converters are provided in an industry standard quarter-brick package.
Part Selection
Output Voltage 12 V 8V Input Voltage 48 V 48 V Max. Output Current 20 A 30 A Max. Output Power 240 W 240 W Typical Efficiency 96% 96% Model Number 0RCM-20S12L 0RCM-30S08L
Notes: 1. Change last character in part number from "L" to "H" for Active High On/Off Logic (e.g. 0RCM-20S12H). 2. Add "G" suffix at the end of the model number to indicate Tray Packaging. 3. All part numbers above indicate RoHS 6. Change the second letter "R" to "7" for RoHS 5 part numbers.
Input Specifications
Parameter Input Voltage Range Input Current (no load) Input Current (full load) Reflected Ripple Current(pk-pk) Reflected Ripple Current(rms) Min 36 V Typ 48 V Max 55 V 80 mA 5.3 A 100 mA 50 mA Notes
Reflected ripple current through a 12 uH source inductor at nominal input voltage and rated load current.
Output Specifications
Parameter Output Voltage 0RCM-20S12x 0RCM-30S08x Output Current 0RCM-20S12x 0RCM-30S08x Load Regulation Ripple and Noise (pk-pk) Ripple and Noise (rms) Min
36 Vin
Typ
48 Vin
Max
55 Vin
Notes Setpoint at no load.
8.8 V 5.8 V 0A 0A -
12.0 V 8.0 V -
14.0 V 9.4 V 20 A 30 A 5% 100 mV 45 mV
0 to 20 MHz BW, use 1.0 uF ceramic cap and 15 uF/100 m ohm tantalum cap at the output.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com
ISOLATED DC/DC CONVERTERS
48 VDC Input 12 VDC/20 A Output, 1/4 Brick
Output Specifications (continued)
Parameter Transient Response Max deviation Recovery to within 1% Min Typ 200 mV 50 uS Max 350 mV 100 uS Notes di/dt =0 .1 A/uS, Vin =48 V Ta = 25 C, 25% load change.
General Specifications
Parameter Switching Frequency Operating Temperature Non-Operating Temperature Weight MTBF (MIL-HDBK-217K) Dimensions Inches (L x W x H) Millimeters (L x W x H) Protection Features Short circuit Over current Under-voltage Remote On/Off Active Low (Optional Active High) Safety Agency Approvals (pending) Min 0 C -55 C Typ 120 kHz 42 g (1.5 oz) >1,000,000 hours 2.28 x 1.45 x 0.50 57.9 x 36.8 x 12.7 Continuous 120% to 140% max Io UVLO Vin < 39.0 0V 2.4 V 0.8 V 18 V Max 70 C 125 C Notes
UL / cUL Recognized Certified to EN60950
25
100.00%
20 400LFM 300LFM 200LFM 100LFM Natural convection 400LFM 300LFM 200LFM 100LFM Natural convection
95.00% 90.00% 85.00% 80.00% 75.00% 70.00% 65.00% 60.00% 1 2.5 5 10 15 20
Output Current
15
10
5
0 0 10 20 30 40 50 60 70 80 Ambient Temperature C
Efficiency vs. Output Current (A)
air flowing from input to output (nominal input voltage).
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com
ISOLATED DC/DC CONVERTERS
48 VDC Input 12 VDC/20 A Output, 1/4 Brick
Mechanical drawing
RoHS Compliance
Complies with the European Directive 2002/95/EC, calling for the elimination of lead and other hazardous substances from electronic products.
(c)2008 Bel Fuse Inc. Specifications subject to change without notice. 103108
CORPORATE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com
FAR EAST Bel Fuse Ltd. 8F/ 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com
EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com


▲Up To Search▲   

 
Price & Availability of 0RCM-20S

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X